|
MGCP 1.0 (RFC 2705) or SIP (RFC 3261) compliant |
|
Supports 16/32 analogue telephony interfaces or single E1 / T1 PRI interface |
|
QoS support guarantees voice bandwidth in a busy network |
|
Supports IP TOS (Type Of Service) |
|
T.30 (G III) / Real Time T.38 / Secured T.38 Fax Relay |
|
Feasible for Fixed IP or dynamic IP network ( PPPoE / DHCP client, support DDNS) |
|
Configurable Hot Line feature |
|
Supports IP-to-PSTN / PSTN-to-IP applications |
|
Life-Line support (IP / power failure over relay) |
|
NAT traversal - STUN and UPnP |
|
Pass through NAT |
|
Call Detailed Records (CDR) |
|
Web-based firmware upgrade |
|
Caller ID Delivery
FXS : DTMF & FSK Call ID generation
FXO : DTMF & FSK Call ID detection |
|
Easy Configuration by IVR and Web-based GUI |
|
Greeting message |
|
Supports SNMP V.2 (optional) |
Technical Specifications
|
|
Voice Algorithms: G.711, G.726, G.729A and G.723.1 |
|
Fax Support: T.30 or Real Time T.38 Fax protocol |
|
Silence Suppression : G.711, G.726, G.729A, G.723.1 |
|
Echo Cancellation: G.168 compliant, up to 40 ms echo tail |
|
Voice Activity Detection (VAD) |
|
Comfort Noise Generation (CNG) |
|
Dialing:DTMF |
|
Analogue Signaling Protocol: Loop Start |
|
Digital Signaling Protocol:
PRI: National ISDN-2, Euro ISDN NET5, Japan INS- NET1500, KDD, 4ESS, 5ESS, DMS100
T1: CAS
E1: R2 MF |
|
Line impedance: T1 100 ohms / E1 120 ohms (balanced), 75 ohms
(unbalanced) |
|
Line coding: T1 AMI, B8ZS, ZCS / E1 HDB3 |
|
Adaptive Jitter Buffer and Programmer Gain Control |
|
T1 / E1 / PRI module (Terminal Block / BNC) |
|
PSTN Interface: FXO analogue (Centronics 50 pin Connector) |
IP Network Specifications
|
|
IETF MGCP v1.0, SIP |
|
LAN Interface: Ethernet 10/100 Base-T Auto-sensing (RJ-45) |
|
WAN Interface: Ethernet 10/100 Base-T Auto-sensing (RJ-45) |
|
QoS: Bandwidth management & IP TOS |
|
Support Dynamic DNS (DDNS) |
|
Support Fixed-IP, PPPoE, DHCP network environment |
Configuration/Management
|
|
Web-based Graphical User Interface (GUI) |
|
Interactive Voice Response (IVR) |
|
SNMP Agent V.2 |
|
Remote management over IP network |
|
Web-based firmwares upgrade capability |
LED Indicators
|
|
Power, Run, Alarm, LAN, WAN, FXS or FXO, LOS
and SYNC |
General Specifications
|
|
Power:AC90V- 260V, 50/60 Hz or -V48VDC |
|
Temperature: 0° to 45°C (Operation)
-25°C to 75°C (Storage) |
|
Humidity: up to 90% non-condensing |
|
Emissions: FCC Part 15 Class B, CE Mark |
|
Telephone Safety: FCC Part 68 |
|
Dimensions: 442 x 330 x 43 mm (W/D/H) |
|
Weight: 4.4 kg |
Models
|
Model |
Description |
XSG3216-E1T1 |
E1 PRI / T1 PRI + 1 WAN + 1 LAN |
XSG3216-32S |
32 FXS + 1 WAN & 1 LAN (DSP*8) |
XSG3216-32O |
32 FXO + 1 WAN & 1 LAN (DSP*8) |
XSG3216-16S16O |
16 FXS + 16 FXO + 1 WAN & 1 LAN (DSP*8) |
XSG3216-16S16P |
16 FXS + 16 PSTN + 1 WAN & 1 LAN (DSP*8) |
XSG3216-24S8O |
24 FXS + 8 FXO + 1 WAN & 1 LAN (DSP*8) |
XSG3216-16S |
16 FXS + 1 WAN & 1 LAN (DSP*8) |
XSG3216-16O |
16 FXO + 1 WAN & 1 LAN (DSP*8) |
XSG3216-8S8O |
8 FXS + 8 FXO + 1 WAN & 1 LAN (DSP*8) |
XSG3216-8S8P |
8 FXS + 8 PSTN + 1 WAN & 1 LAN (DSP*8) |
The specifications are subject to change without notice. All other products or trademarks are the property of their respective owners. |
