Türkçe  
Home Page Company Profile Products Contact Us Downloads
 
Overview | Key Features


IP Phone Key Features

Following RFC-3261 SIP standard.

Support password authentication using MD5 digest.

Support Inband/ SIP INFO/RFC-2833 for DTMF relay.

Support proxy routed mode and direct mode.

Dynamic IP support (DHCP and PPPoE)

Getting IP from DHCP server using DHCP protocol or through ADSL modem using PPPoE protocol, automatically reconnect when PPPoE lost connection.

Passing through NAT devices.

Remote software upgrade capability ( via FTP or HTTP-Post )

FTP/ HTTP-Post protocol provide reliable remote upgrade through Internet.

Advanced Digital Signal Processing (DSP) technology to ensure superior audio quality

Hardware System on a Chip solution with built in DSP processor makes sure the perfect voice quality.

Support G.723.1, G.729A/B, G.711 (A-law/U-law) voice codecs

Following ITU-T standard to support best compatibility.

Phone Book : 50 sets.

Speed dial : 10 sets.

Support Silence Suppression, VAD (Voice Activity Detection), CNG (Comfort Noise Generation).

Ping function supported

Ping other device from ET-747 to make sure the Internet connection is ok.

System status displayed on the LCD panel

User can easily know if the ET-747 is working normally and monitor the system status (network status, registering status) from the LCD panel display.

System status display on the web interface

User can easily know whether the ET-747 is registered or not from the web browser.

A “PKT Trace” function is supported to display the packets received on the LCD panel to let administrator find the network problem.

Provide easy configuration methods

Very easy setting by keypads on the phone set.

Setting by web browser.

Support RFC-3261, TCP/UDP/IP, RTP/RTCP, HTTP, ICMP, ARP, DNS, DHCP, NTP/SNTP, FTP, PPP, PPPoE, 802.1Q/P protocols.

Interoperable with most of the existing SIP VoIP devices (IP-phone, gateway,  proxy, soft-switch, IP-PBX)

The WAN Port automatically works for paralleled Ethernet cable and crossed Ethernet cable.

Automatic provisioning supported.

VLAN supported.


Call Features

Authentication.

Blind Transfer.

Call Forward on Busy.

Call Forward on No Answer.

Call History.

Call Hold.

Caller ID.

Consultant Transfer.

Do Not Disturb.

Unconditional Call Forward.

Visual Indicator for Message Waiting.


Hardware Specification

PC Port: 1xRJ45 10/100 Base-T Ethernet, line auto-sensing/switching.

WAN Port: 1xRJ45 10/100 Base-T Ethernet, line auto-sensing/switching.

(Option)Power Over Ethernet 802.3af function.

LCD display: 2x16 characters

Phone Case: 36-button keypad

Universal Switching Power Adaptor: Input: 100-240V AC

Output: +5.4V DC, 0~1.2A

Speaker: 8 Ohm/0.2 Watt speaker for speakerphone operation

Dimension: 19cm(W)x23cm(D)x9cm(H)

Weight: 870 g

Operating Temperature: 32 - 104°F (0 – 40°C)

Humidity: 10%-95% (non-condensing)

EMI Compliance: CE / FCC